top of page
Search

🚀 A new milestone for WoundSim: COPVs Manufacturing

Nov 10
2 min read

After establishing ourselves as leaders in COPV design, we are reaching a new milestone with WoundSim: manufacturing.

For years, WoundSim has helped engineers design and simulate composite overwrapped pressure vessels faster and with more confidence. With our latest release, WoundSim now goes one step further and takes the design all the way to the winding machine.


One platform, from laminate design to machine code

For the first time, we can bring the entire COPV development workflow together on a single platform — from laminate design to machine code generation.

  1. Design: define the liner, the laminate and the winding layup.

  2. Simulate: build and run the finite element model of the vessel.

  3. Manufacture: generate the winding path and toolpath, then the machine code, through a dedicated post-processor.

No more exporting data between disconnected tools, and no more re-entering the design in a separate winding software. The layup you validate in simulation is the layup you wind.



Validated on the shop floor

From design and simulation to manufacturing, we are pushing the boundaries of what an integrated COPV engineering platform can achieve — and we tested it against the reference.

We validated the WoundSim G-code against established commercial winding software, including Winding Expert and Composicad. The results matched. We then used WoundSim to manufacture our first pressure vessels, directly from the machine code it generated.


Toward a true COPV Digital Twin

This is more than a new set of features. It is a major step toward bridging the gap between the digital model and the physical manufacturing process — bringing us closer to a truly integrated COPV Digital Twin.

When design, simulation and manufacturing share the same data, every change in the design is reflected in the machine code, and every manufacturing constraint can be taken into account at the design stage. Fewer iterations, fewer errors, and a faster path from concept to qualified vessel.


 
 
 

Comments


bottom of page